EDMUNDSON INDUSTRIALINDUSTRIAL ELECTRICAL SUPPLY
CALL(832) 975-8827Request a Quote
Home›Cross-Reference›Square D›FA / FAL
Cross-Reference · Square D

Square D FA / FAL — Replacement & Cross-Reference

The Square D FA and FAL are discontinued F-frame molded-case breakers rated to 100 A. The current path is the PowerPact H-frame (HD / HG / HJ / HL), chosen by interrupting rating. FAL denotes the higher-interrupting version of the FA frame, so match the interrupting rating (AIC), not just the amp rating, when you cross-reference. To keep a panel as-built, Edmundson Industrial sources new-surplus, used-tested, and reconditioned FA and FAL breakers.

Status

BrandSquare D / Schneider Electric
FrameF-frame (FA standard, FAL higher AIC)
Amp rangeto 100 A (nominal — confirm on nameplate)
Poles1, 2, 3
Voltage240 / 480 / 600 VAC by catalog code
InterruptingFA standard, FAL higher AIC — verify at quote
Current replacementPowerPact H-frame (HD / HG / HJ / HL)
Example catalogsFA32100, FAL34050, FAL24020 (decode: frame–poles–voltage–amps; confirm on nameplate)

Cross-Reference

If you have (obsolete)Recommended pathNotes
FA (standard AIC)PowerPact HD / HG by amp & AICMatch the interrupting rating to the available fault current at the panel.
FAL (higher AIC)PowerPact HJ / HLFAL is the high-interrupting version — do not down-rate AIC on the swap.
Keep the panel as-builtNew-surplus / used-tested FA or FAL (we source)True drop-in. Match poles, voltage, amp, and AIC on the full catalog string.
I-Line / plug-on variantLike-for-like surplus, or PowerPact I-Line + adapterI-Line footprint changed — our fab side makes adapter and filler hardware.

Cross-references are starting points — confirm interrupting rating, poles, voltage, trip type, and mounting before substituting. Send the catalog number and we'll verify the match.

Replacing an FA on an I-Line panelboard? The PowerPact I-Line footprint differs from the legacy FA stab. Our fabrication side builds adapter and filler hardware so a current breaker lands in the old opening — part and panel on one PO.

Key Specs (frame overview)

Is the Square D FA / FAL still made?

No. FA and FAL are discontinued; the PowerPact H-frame is the current equivalent. Because FA-class breakers sit in thousands of legacy panelboards, the surplus market for them is deep — FA-frame numbers like FA32100 trade in the thousands of active marketplace listings while barely registering on Google. The practical play is a surplus drop-in now and a PowerPact retrofit at a planned panel upgrade.

FAQ

Is the Square D FA / FAL discontinued?
Yes — the FA and FAL frames are discontinued. New-surplus, used-tested, and reconditioned units remain available through Edmundson Industrial.
What is the difference between FA and FAL?
Same F-frame and amp range; FAL carries a higher interrupting rating (AIC). When cross-referencing, match or exceed the original AIC, not just the amp rating.
What replaces a Square D FA breaker?
The PowerPact H-frame (HD / HG / HJ / HL), selected by amp rating and interrupting rating. We also source original FA / FAL surplus to keep a panel as-built.
Can you source a specific number like FA32100?
Yes — FA32100 is a common catalog number on the surplus market. Send the exact string and we'll quote new-surplus, used-tested, or reconditioned with condition disclosed.
Will a PowerPact H-frame fit my FA panelboard?
Unit-mount usually adapts; I-Line plug-on footprints changed. Our fabrication side makes adapter and filler plates so the current breaker fits the legacy opening.

Availability & Quote

Condition always disclosed before sale — new-surplus, used-tested, or reconditioned — with photos on request.

Request a Quote

or send the catalog number to sales@edmundsonindustrial.com · (832) 975-8827 · Houston, TX. Same-day response on most requests.

Related Square D pages

Send the catalog number off the breaker.

Condition disclosed before sale. Same-day response on most requests.

Request a Quote