Ross Hill 0410-0016-00 Starter Coil, 15D22G002

Ross Hill 0410-0016-00 identifies the GE/ABB 15D22G002 operating coil used with two- and three-pole NEMA Size 2 300-Line devices. ABB coil data assigns suffix 002 to 115 V at 60 Hz. The associated CR306D002 starter is cataloged in the 115 to 120 V separate-control group; the installed coil label and actual frequency remain the final electrical check.

Independent supplier. Edmundson Industrial is not appointed, endorsed, or sponsored by Ross Hill, NOV, GE, ABB, Mersen, or any other manufacturer named on this page. Names and part numbers appear for identification only. Availability, condition, price, and lead time are confirmed for each request.

Part-number identification

The exact coil identity is 15D22G002. The 15D22G family establishes the Size 2 device context, while the final three digits establish the coil-voltage and frequency form. Preserve every digit from the installed label.

The complete installed label remains the ordering reference. Match the part number, electrical ratings, physical interface, and circuit duty before approving a replacement.

Voltage and frequency form one coil rating

A coil voltage without its frequency is incomplete. ABB identifies 002 as 115 V at 60 Hz and publishes other suffixes for other voltage-frequency combinations. Confirm the supply at the coil terminals and use the exact suffix rather than treating all nominal 120 V coils as one item.

Why the starter catalog says 115 to 120 V

CR306D002 appears in ABB starter tables under 115 to 120 V separate control. The renewal-coil table provides the more granular coil suffix. These two catalog views describe the assembled starter and the replaceable coil, respectively.

NEMA size is a physical boundary

A matching nominal voltage does not establish fit. Coil window, bobbin dimensions, lead arrangement, retainer, magnet geometry, and device size all matter. Confirm that the starter or contactor is a Size 2 two- or three-pole form before ordering 15D22G002.

Inspect the magnet before replacing only the coil

Heat-darkened insulation, a damaged retainer, contamination, worn shading components, or a binding armature can prevent reliable operation. Photograph the coil and magnet assembly together and report the original failure mode, including chatter, overheating, dropout, or an open winding.

Also searched as

0410-0016-00 · 0410001600 · 15D22G002 · GE Size 2 starter coil · 115 V 60 Hz starter coil · CR306D002 coil

What to send with your request

Keep the complete suffix, frequency, device size, and magnet hardware together.

• Complete coil number and RHCC number
• Photographs of the coil label, leads, terminals, retainer, and magnet assembly
• Starter or contactor catalog number, NEMA size, and pole count
• Measured control voltage and circuit frequency
• Failure symptoms and any visible heat or mechanical damage
• Quantity required, acceptable condition, and need-by date

A purchase order is not required for an identification review. Send the complete numbers and clear equipment photographs so the quoted item can be checked against the application.

Related

FAQ

Availability & Quote