EDMUNDSON INDUSTRIALOILFIELD ELECTRICAL SUPPLY
Drilling Rig Electrical · NEMA Size 4 MCC starter

Ross Hill 1303-2114-00 Motor Starter, CR306F002

Ross Hill 1303-2114-00 identifies GE/ABB CR306F002, a NEMA Size 4, 135 A, three-pole magnetic starter with 115-120 V separate control.

Ross Hill 1303-2114-00 identifies GE/ABB CR306F002, a NEMA Size 4, 135 A, three-pole magnetic starter with 115-120 V separate control. Use the complete installed identifiers and equipment ratings as the ordering reference. Availability, condition, price, and lead time are confirmed for each request.

Independent supplier. Edmundson Industrial is not appointed, endorsed, or sponsored by any manufacturer named on this page. Ross Hill, NOV, GE, ABB, TE Connectivity, Potter & Brumfield, Mersen, ZF, Cherry, Clarostat, and other names and part numbers appear for identification only. Their use does not imply endorsement or a current manufacturer relationship. Availability, condition, price, and lead time are confirmed for each request.

Identification details for Ross Hill 1303-2114-00
RHCC part number1303-2114-00
Part descriptionSTARTER-SIZE 4, 120V
Manufacturer referenceCR306F002
System contextMCC
Manufacturer-documented frameNEMA Size 4
Manufacturer-documented frame limits135 A maximum continuous, 600 V maximum
Manufacturer-documented three-phase HP ceilings40 HP at 200 V; 50 HP at 230 V; 100 HP at 460 or 575 V
Coil-suffix context002: 115 to 120 V at 60 Hz; 110 V at 50 Hz
Configuration boundaryMotor, heaters, auxiliaries, enclosure, wiring, and bucket must be confirmed

A frame ceiling is not a motor setting

ABB publishes 135 A maximum continuous current and 600 V maximum for the Size 4 frame. It also lists three-phase ceilings of 40 HP at 200 V, 50 HP at 230 V, and 100 HP at 460 or 575 V. Those values define frame limits. They do not replace the motor nameplate or establish the correct overload protection.

The 002 suffix supplies control-voltage context

ABB's Size 4 coil table maps suffix 002 to 115 to 120 V at 60 Hz and 110 V at 50 Hz. The starter can be installed in a much higher-voltage motor circuit while its operating coil uses this lower control voltage. Read line and control circuits separately.

Also searched as

1303-2114-00 · 1303211400 · CR306F002 · GE CR306F002 · NEMA Size 4 starter 120 V

What to send with your request

Send the motor and bucket details with the starter label so frame and configuration are checked together.

  • The complete RHCC and CR306 reference, including every suffix character
  • Photographs of the starter label, complete bucket, terminals, and wiring
  • Line voltage plus control voltage and frequency
  • Motor voltage, phase, horsepower, full-load current, and service factor
  • Overload relay, heater elements, coil, and contact-set numbers now installed
  • Auxiliary contacts, control transformer, disconnect, enclosure, quantity, and need-by date

Related

Identification checkpoint

For RHCC 1303-2114-00, confirm manufacturer reference: CR306F002; manufacturer-documented frame: NEMA Size 4; manufacturer-documented frame limits: 135 A maximum continuous, 600 V maximum. Use the installed label and complete suffix before treating another item as equivalent.

FAQ

What is Ross Hill 1303-2114-00?
It is the RHCC number recorded in the MCC group as STARTER-SIZE 4, 120V, against CR306F002.
What are the published Size 4 frame limits?
ABB publishes 135 A maximum continuous current and 600 V maximum. These are frame ceilings, not a motor setting or application approval.
What does suffix 002 indicate?
ABB's Size 4 coil table maps suffix 002 to 115 to 120 V at 60 Hz and 110 V at 50 Hz.
Does the starter number select the overload heaters?
No. Heater selection remains motor- and application-specific and must be checked against the installed overload, motor nameplate, enclosure, ambient, and service conditions.
Can any NEMA Size 4 starter replace it?
No interchange is published here. Match the full starter, coil, poles, overload and heaters, auxiliaries, enclosure, wiring, terminals, mounting, motor, and bucket.

Availability & Quote

Request a Quote or send the part number to sales@edmundsonindustrial.com (832) 975-8827 Houston, TX.

Want a quick quote for 1303-2114-00?

Fill out your contact info here, and we'll get a quote sent to you ASAP!