Ross Hill 0001-1467-38 Complete Foot Throttle

Ross Hill 0001-1467-38 identifies the complete foot-throttle assembly associated with drawing 11467-38 Rev. H, including enclosure, pedal, linkage, springs, and rheostat. Use the complete installed identifiers and equipment ratings as the ordering reference. Availability, condition, price, and lead time are confirmed for each request.

Independent supplier. Edmundson Industrial is not appointed, endorsed, or sponsored by any manufacturer named on this page. Ross Hill, NOV, Ohmite, Hoyt, GE and other manufacturer names and part numbers appear here for identification only. Their use does not imply authorization, endorsement, or any current manufacturer relationship. Availability, condition, price, and lead time are confirmed for each request.

The number is the whole throttle, and that is the point

We are not publishing these three as items that can be bought today. They are published because they are the numbers most likely to be ordered by mistake when the whole assembly was intended, and because a buyer who only needs a pedal should know a pedal has its own number.

What is inside it

A foot throttle is a mechanical assembly with one electrical element in it, and most of the ways it fails are mechanical. The manufacturer table runs to more than forty line items. A representative selection is below, reproduced for identification.

Two torsion springs, a damper, a connecting rod, bearings and flinger shields do the work of returning the pedal and keeping the linkage clean. One rheostat turns the pedal position into a setpoint the drive can use. If a throttle has gone heavy, sticky, or will not return, the fault is more likely to be in the first group than the second, and that is worth establishing before a whole assembly is ordered.

Also searched as

0001-1467-38 · 0001146738 · 11467-38 · 11467-38 Rev. H · complete foot throttle Ross Hill · Draw Works foot throttle assembly

The drawing number and the part number are not the same string

The manufacturer table is referenced to 11467-38 Rev. H. The part number is 0001-1467-38. They differ by the leading 0001 group. That is an observation about these two documents, not a numbering rule we are publishing for the rest of the catalogue, and we have not tested it against other Ross Hill families.

It is worth knowing because a rig that keeps drawings rather than part lists may have the shorter form written on a tag or a drawing register. If the number you are holding is the short one, send it in that form and say where you read it. We would rather match it here than have you convert it and get the group wrong.

A foot throttle is not a hand throttle

So they are not two housings around the same electrical part. If your console has both a wheel and a pedal, they are separate items with separate numbers, and telling us which one you are replacing removes a whole class of wrong answer. We do not publish any interchange between them.

What to send with your request

This one turns on scope before anything else, so the first question is what you actually need.

• Whether you need the complete assembly or a single component such as the pedal or the enclosure
• A photograph of the enclosure nameplate and, if it is legible, the console identification plate
• Whether the complaint is mechanical (sticking, not returning, worn pivot) or electrical (no setpoint, erratic setpoint)
• Quantity required and the condition you can accept
• Your need-by date and destination

We do not need a purchase order to answer an identification question. Send the number and the photograph and we will tell you what we can establish.

Related

Questions we get on this number

Availability and quote