EDMUNDSON INDUSTRIALINDUSTRIAL ELECTRICAL SUPPLY
HomeSpecialtiesDrilling Rig Electrical0001-6307-70
Drilling Rig Electrical · SCR power conversion

Ross Hill 0001-6307-70 — Model 1400 SCR Bridge

The SCR bridge assembly from a Ross Hill Model 1400 SCR house — the power conversion stage that turns generated AC into controlled DC for the drilling motors.

Independent sourcing, not an authorized distributor. Ross Hill and NOV are trademarks of their respective owners, used here for reference only. We supply this item as new-surplus, used-tested, and reconditioned, with condition disclosed before sale.

Part number0001-6307-70
EI referenceEI-0001-6307-70
Stock codeCA01-6307-70
SystemRoss Hill / Hill Hayes / NOV SCR drilling
FunctionSCR power conversion
ConditionNew-surplus, used-tested, reconditioned
Also searched as0001-6307 · 0001-6307-70 · 0001630770 · EI-0001-6307-70 · CA01-6307-70 · Ross Hill · NOV · Hill Hayes

What it does

The bridge is where the actual power conversion happens. Thyristors fire under control of the DC module to produce variable DC for the drilling motors. Because it is a power assembly rather than a control card, failures tend to be visible and consequential: a shorted device, a failed snubber, a blown semiconductor fuse, and the affected drive is down.

Symptoms that point here

Most people arrive at this page from a symptom, not a part number. These are the failure signatures associated with this item. They are starting points for diagnosis, not a substitute for it.

What you are seeingWhat it usually indicates
Semiconductor fuse blows repeatedlyShorted device in the bridge — do not keep replacing fuses
Drive delivers reduced or unstable DC outputDevice or firing fault on one leg
Visible heat damage, discoloration, or smell at the bayStop and inspect before re-energizing
Drive trips as soon as load is appliedBridge or firing circuit under load

Nameplate & revision

Revisions differ across the production life of this equipment, and on some Ross Hill items the dash suffix carries a calibration rather than a revision level. We verify the exact dash number and revision against the physical unit before quoting, and we will send photos of the plate on the unit we are offering.

Send a photo of your nameplate, or type out what it reads, and we will match the revision rather than guess at it.

Condition & sourcing

Supplied as new-surplus (unused, from the secondary market), used-tested, or reconditioned, with condition disclosed before sale and photos on request. Availability on legacy Ross Hill and NOV items changes constantly — send the number and we will tell you what we can actually find rather than quote something we cannot deliver.

FAQ

What is the Ross Hill Model 1400 SCR bridge?
Part 0001-6307-70, the thyristor bridge assembly that converts generated AC into controlled DC for the drilling motors in a Model 1400 SCR house.
A fuse keeps blowing — should I just replace it?
No. A repeatedly blowing semiconductor fuse usually means a shorted device. Replacing fuses into a shorted bridge risks further damage. Have the devices checked.
Do you sell individual pucks and fuses as well as the bridge?
Yes. We handle SCR pucks, semiconductor fuses, and complete bridge assemblies.

Availability & Quote

Condition always disclosed before sale. Photos on request. Same-day response on most requests.

Request a Quote or send the part number to sales@edmundsonindustrial.com · (832) 975-8827 · Houston, TX.

Related

Send 0001-6307-70 and your need-by date.

Condition disclosed before sale. Same-day response on most requests.

Request a Quote