Ross Hill 0100-0134-02 Dual Rheostat Assembly, Hand Throttle

Ross Hill 0100-0134-02 identifies the 1 kohm dual hand-throttle rheostat assembly; confirm both elements, shaft, rotation, stop pin, terminals, and mounting.

Use the complete installed identifiers and equipment ratings as the ordering reference. Condition is stated with the offer.

Independent supplier. Edmundson Industrial is not appointed, endorsed, or sponsored by any manufacturer named on this page. Ross Hill, NOV, GE, Clarostat, McCarron and other manufacturer names and part numbers appear here for identification only. Their use does not imply authorization, endorsement, or any current manufacturer relationship. Condition is stated with the offer.

Identification details for Ross Hill 0100-0134-02
RHCC part number	0100-0134-02
Part description	DUAL RHEOSTAT ASSY
Fuller description reported elsewhere	RHEOSTAT-1KOHM, DUAL ASSY F/HAND THROTTLE
Resistance value reported	1 kohm per element
Application reported	Hand throttle
The foot throttle element instead	0506-0003-00, single 200 ohm, 90 degrees

Hand or foot decides the part

A driller can set the same drive from a wheel or from a pedal, and the two use different setpoint elements. That is not a detail. It is the whole selection.

So if the paperwork says rheostat and the rig has both a wheel and a pedal, the paperwork has not told you enough yet. Tell us which one the part came out of and the choice collapses to one number.

Also searched as

0100-0134-02 · 0100013402 · dual rheostat assembly Ross Hill · 1 kohm dual assembly hand throttle · double potentiometer drilling throttle

What to send with your request

Which throttle it came out of settles most of the identification question.

Whether it came out of a hand wheel or a foot pedal
The resistance value marked on the elements, read as printed
Whether the assembly has a mechanical stop or a torque limit feature
A photograph showing both elements, the mounting and the terminals
Quantity required, the condition you can accept, and your need-by date

Send the number and photograph with your parts requirement for EI review and a quote.

Ross Hill 0506-0003-00 Foot Throttle Rheostat, the 200 ohm alternative Ross Hill 0506-0001-00 Rheostat, 1000 Ohm Ross Hill 0001-1467-38 Complete Foot Throttle Ross Hill 0509-2500 Driller's Console PCB SCR parts identification & RFQ support SCR Bay Components Ross Hill / NOV

Questions we get on this number

What do you need to quote Ross Hill 0100-0134-02?

Whether it came out of a hand wheel or a pedal, the value marked on the elements, whether the assembly has a stop or torque limit feature, and a photograph showing both elements and the mounting. Quantity and need-by date help us give you a useful answer.

What is Ross Hill 0100-0134-02?

Ross Hill 0100-0134-02 identifies the 1 kohm dual hand-throttle rheostat assembly; confirm both elements, shaft, rotation, stop pin, terminals, and mounting.

What should be verified before ordering 0100-0134-02?

Verify the complete installed part number, manufacturer reference, electrical ratings, physical interface, circuit duty, and equipment configuration.

What should I send for a 0100-0134-02 quote?

Send clear label and equipment photographs, all identifiers, relevant electrical and mechanical ratings, quantity, acceptable condition, and need-by date.

Request a quote

Request a quote by emailing sales@edmundsonindustrial.com or by calling (832) 975-8827

Identification checkpoint

For RHCC 0100-0134-02, confirm fuller description reported elsewhere: RHEOSTAT-1KOHM, DUAL ASSY F/HAND THROTTLE; resistance value reported: 1 kohm per element; application reported: Hand throttle. Use the installed label and complete suffix before treating another item as equivalent.

Want a quick quote for 0100-0134-02?

Fill out your contact info here, and we'll get a quote sent to you ASAP!