EDMUNDSON INDUSTRIALOILFIELD ELECTRICAL SUPPLY
Drilling Rig Electrical · DC control

Ross Hill 0522-2400-21: DC Control Module (NOV 6415-2400-21)

The standard DC control module in a Ross Hill / NOV SCR drive, and the one Ross Hill number we have confirmed NOV reissued under its own number.

Independent supplier. RHCC 0522-2400-21 is identified from the installed number. Manufacturer and trademark names are used for reference only, and condition is disclosed before sale.

Part number0522-2400-21
NOV part number6415-2400-21
ManufacturerRoss Hill / NOV
SystemRoss Hill / Hill Hayes / NOV SCR drilling
Module typeDC control: standard
Pairs withAC control module 0521-2500-14
ConditionNew-surplus, used-tested, reconditioned

Also searched as

0522-2400-21 · 0522240021 · 6415-2400-21 · 6415240021 · 0522-2400 · 2400-21 · NOV 6415-2400-21 · Ross Hill DC control module · RHCC DC module

Why this number matters

When NOV took on Ross Hill Controls and the Hill Hayes SCR line, most of the part numbering carried straight across: the Ross Hill number and the NOV number are usually the same number. This module carries a confirmed Ross Hill-to-NOV cross-reference. A unit stamped 6415-2400-21 and a unit stamped 0522-2400-21 identify the same item.

That matters commercially, because a buyer holding one number will often be told the part does not exist by a supplier who only indexes the other. If you have been quoted 'no longer available' against one of these numbers, it is worth trying the other.

Where it sits in the SCR system

The DC control modules are the regulation side of a Ross Hill SCR drive. The AC module handles gate firing, drive assignment, and protection; the DC module closes the current and speed loop that gives stepless control of the DC drilling motors. They work as a matched pair, and a fault in one is regularly misattributed to the other.

The 0522-2400 family

Several dash variants exist. They are not documented as interchangeable, and we do not treat them as such.

NumberPart descriptionRelationship
0522-2400-21DC control module, standard. NOV 6415-2400-21.this page
0522-2400-23DC control module, regulation. Sets SCR phase angle from the driller's handwheel setpoint.Different variant
0522-2400-27DC control module, series type, with 1K ohm resistor.Different variant
0522-2400-00DC control module, shunt type.Different variant
0521-2400-21Exact-match identifier that requires a physical board label; no interchange is assigned.Nameplate confirmation required
0521-2500-14AC control module: the other half of the pair, not a DC module.Different function

We will not tell you that two of these substitute for one another. Send the number that is actually on your board, and the rig and drive it came out of.

Nameplate & revision

We verify the exact dash number against the physical unit before quoting, and we send photos of the label on the unit being offered. If your board carries both a Ross Hill number and an NOV number, send both.

What to send us

These are the details that let us identify the right unit instead of guessing at it.

  • The complete number as stamped, including the dash suffix
  • Any second number on the same label: Ross Hill and NOV numbers often both appear
  • Any revision letter or date code
  • Rig, drive, and what the module is assigned to (drawworks, mud pump, rotary table)
  • What the system is doing that led you here
  • A photo of the board label and the card edge if you can take one
  • Quantity and your need-by date

Condition and sourcing

RHCC 0522-2400-21 is quoted only after current availability, condition, and lead time are confirmed. Any offered unit is identified as new-surplus, used-tested, or reconditioned before sale.

If the observed failure does not line up with RHCC 0522-2400-21, use the SCR Drive Fault Finder to narrow the subsystem before requesting a part.

Identification checkpoint

For RHCC 0522-2400-21, confirm nov part number: 6415-2400-21; module type: DC control: standard; pairs with: AC control module 0521-2500-14. Use the installed label and complete suffix before treating another item as equivalent.

FAQ

What is the Ross Hill 0522-2400-21?
It is the standard DC control module in a Ross Hill / NOV SCR drilling drive. It is the one Ross Hill number we have confirmed that NOV reissued under its own part number, 6415-2400-21.
Is 0522-2400-21 the same as NOV 6415-2400-21?
Yes. 0522-2400-21 cross-references to NOV 6415-2400-21. We still verify the number against the physical label before quoting.
What is the difference between 0522-2400-21 and 0522-2400-23?
Both are DC control modules in the same family. The -21 is the standard module; the -23 is the regulation module that sets SCR phase angle from the driller's handwheel setpoint. They are not interchangeable; confirm the dash number on the board.
I have a module stamped 0521-2400-21, not 0522. Which is it?
Do not substitute 0521-2400-21 for 0522-2400-21. Quote against the complete identifier printed on the physical board; 0522-2400-21 cross-references to NOV 6415-2400-21.
Can you supply a replacement?
Yes. We source these as new-surplus, used-tested, and reconditioned, with condition disclosed before sale. Send whichever number is on your unit: the Ross Hill number or the NOV number.

Availability & Quote

For RHCC 0522-2400-21, condition is disclosed before sale. Item photographs are supplied with an actual offer.

Request a quote by emailing sales@edmundsonindustrial.com or by calling (832) 975-8827

Related

Want a quick quote for 0522-2400-21?

Fill out your contact info here, and we'll get a quote sent to you ASAP!