EDMUNDSON INDUSTRIALOILFIELD ELECTRICAL SUPPLY
Drilling Rig Electrical · MCC bucket starter

Ross Hill 1303-2110-00 Motor Starter, GE CR306C002

Ross Hill 1303-2110-00 identifies GE/ABB CR306C002, a NEMA Size 1, 27 A, three-pole magnetic starter with 115-120 V separate control.

Use the complete installed identifiers and equipment ratings as the ordering reference. Condition is stated with the offer.

Independent supplier. Edmundson Industrial is not appointed, endorsed, or sponsored by any manufacturer named on this page. Ross Hill, NOV, GE, ABB and other manufacturer names and part numbers appear here for identification only. Their use does not imply authorization, endorsement, or any current manufacturer relationship. Condition is stated with the offer.

Identification details for Ross Hill 1303-2110-00
RHCC part number1303-2110-00
Part descriptionSTARTER SIZE 1, 120V
Manufacturer referenceCR306C002
GE series and NEMA sizeCR306 series, NEMA size 1
Poles and continuous rating3 pole, 27 A, 600 V maximum
Coil115 to 120 V AC, 50/60 Hz
TypeFull voltage non-reversing, open enclosure, supplied with a thermal overload relay
Published horsepower7.5 HP at 3 phase 240 V, 10 HP at 3 phase 460 and 480 V

Full identification matters

Send the complete part number, label photos, equipment details, and any proposed replacement already included in your requirement. EI reviews the identification and configuration with your quote request; a similar number or rating does not establish fit.

What comes with it and what does not

Published descriptions of this reference say the starter is supplied with a thermal overload relay. They do not say it is supplied with heaters. That distinction is the difference between a starter you can put to work and one that will sit in a bucket doing nothing useful.

Also searched as

1303-2110-00 · 1303211000 · CR306C002 · GE CR306 size 1 · NEMA size 1 starter 120 V coil · Ross Hill MCC starter size 1

A stores number is not a purchase order number

The same point that applies to the breakers on this equipment applies here. 1303-2110-00 is how the equipment builder catalogued the item. CR306C002 is how the starter manufacturer catalogues it. A motor control distributor will recognise the second and not the first.

What to send with your request

Send the complete installed identifiers and starter size with your parts requirement for review.

  • The NEMA size stamped on the starter or the overload block
  • A photograph of the starter label and of the overload block
  • Whether you need the starter alone or the starter with an overload relay and heaters
  • Quantity required, the condition you can accept, and your need-by date

Send the number and photograph with your parts requirement for EI review and a quote.

Related

Questions we get on this number

What is Ross Hill 1303-2110-00?
Ross Hill 1303-2110-00 identifies GE/ABB CR306C002, a NEMA Size 1, 27 A, three-pole magnetic starter with 115-120 V separate control.
What should be verified before ordering 1303-2110-00?
Verify the complete installed part number, manufacturer reference, electrical ratings, physical interface, circuit duty, and equipment configuration.
What should I send for a 1303-2110-00 quote?
Send clear label and equipment photographs, all identifiers, relevant electrical and mechanical ratings, quantity, acceptable condition, and need-by date.

Request a quote

Request a quote by emailing sales@edmundsonindustrial.com or by calling (832) 975-8827

Identification checkpoint

For RHCC 1303-2110-00, confirm manufacturer reference: CR306C002; ge series and nema size: CR306 series, NEMA size 1; poles and continuous rating: 3 pole, 27 A, 600 V maximum. Use the installed label and complete suffix before treating another item as equivalent.

Want a quick quote for 1303-2110-00?

Fill out your contact info here, and we'll get a quote sent to you ASAP!