EDMUNDSON INDUSTRIALINDUSTRIAL ELECTRICAL SUPPLY
HomeSpecialtiesDrilling Rig Electrical0509-2500
Drilling Rig Electrical · Driller's console

Ross Hill 0509-2500 — Driller's Console PCB, PC1

The PC1 card from the Ross Hill / NOV driller's console — the interface between the driller's controls and the SCR assignment and drive logic.

Independent sourcing, not an authorized distributor. Ross Hill and NOV are trademarks of their respective owners, used here for reference only. We supply this item as new-surplus, used-tested, and reconditioned, with condition disclosed before sale.

Part number0509-2500
EI referenceEI-0509-2500
Stock codeEL09-2500-00
SystemRoss Hill / Hill Hayes / NOV SCR drilling
FunctionDriller's console
ConditionNew-surplus, used-tested, reconditioned
Also searched as0509-2500 · 05092500 · 2500 · EI-0509-2500 · EL09-2500-00 · Ross Hill · NOV · Hill Hayes

What it does

The driller's console is where handwheel setpoints, assignment switches, and indication all come together. PC1 is the card carrying that interface into the SCR system. Faults here look like control problems rather than power problems: a handwheel that does nothing, indication that disagrees with what the equipment is doing, or an assignment that will not take.

Symptoms that point here

Most people arrive at this page from a symptom, not a part number. These are the failure signatures associated with this item. They are starting points for diagnosis, not a substitute for it.

What you are seeingWhat it usually indicates
Handwheel produces no response at the motorSetpoint not reaching the drive
Console indication disagrees with actual equipment stateInterface or indication path degraded
Assignment will not take or drops outAssignment logic path
Intermittent control that worsens with vibrationConnector or card-edge issue — inspect before replacing

Nameplate & revision

Revisions differ across the production life of this equipment, and on some Ross Hill items the dash suffix carries a calibration rather than a revision level. We verify the exact dash number and revision against the physical unit before quoting, and we will send photos of the plate on the unit we are offering.

Send a photo of your nameplate, or type out what it reads, and we will match the revision rather than guess at it.

Condition & sourcing

Supplied as new-surplus (unused, from the secondary market), used-tested, or reconditioned, with condition disclosed before sale and photos on request. Availability on legacy Ross Hill and NOV items changes constantly — send the number and we will tell you what we can actually find rather than quote something we cannot deliver.

FAQ

What is the driller's console PC1 card?
Ross Hill 0509-2500, the PC1 board in the driller's console that interfaces the driller's controls to the SCR assignment and drive logic.
My console is dead — is this the card?
Possibly, but confirm supply voltages and connectors first. Console faults are frequently connector and vibration related rather than card failure.
Can you source console parts as well as cards?
Yes. We handle console assemblies and individual boards. Send what you have.

Availability & Quote

Condition always disclosed before sale. Photos on request. Same-day response on most requests.

Request a Quote or send the part number to sales@edmundsonindustrial.com · (832) 975-8827 · Houston, TX.

Related

Send 0509-2500 and your need-by date.

Condition disclosed before sale. Same-day response on most requests.

Request a Quote